Nieuwe ontwikkel versie OzeCE 2.20d

[kalkendotters]

Op http://www.oziexplorer3.com/ozice/dev/deve...nt_version.html kun je de nieuwe developmentversie vinden van OZI voor de PDA.

Installeer daarvoor eerst de 'gewone' versie van OziCE (2.19) en plaats daarna het bestand oziCE_dev.exe in hetzelfde mapje.

Nieuw (oa.):

• Roterende kaarten (alleen in 90° stappen)
  
• Sneller in en uitzoomen
  
• Mapobjecten (WP, etc) wijzigen door kort aan te klikken ipv vasthouden
  
• Autoreconnect met GPS als de verbinding wegvalt
  
• Gebruik van SRTM datafiles om kaarthoogte aan te kunnen geven
  

[BBosman]

Ondertussen zitten we alweer op 2.23.

 

Leuke nieuwe dingen vergeleken met de vorige versie:

• 3D perspective view.
  
  
• Analoge metertjes.
  
  
• Hoop snelheid en stabiliteits verbeteringen.
  

 

 

EDIT: Het valt me net op dat mijn waypoints op de kaart geen labels met de code/naam meer hebben. Ben benieuwd of ik wat fout gedaan heb of dat dit "new and improved" is.

EDIT2: Lag dus aan mij.

24 december 2008 bewerkt door BBosman

[IkbenMamma]

Er was al een kersvers draadje over de nieuwe OZI, kunnen deze misschien worden samengevoegd

24 december 2008 bewerkt door IkbenMamma

[BBosman]

En versie 2.27d is er ook alweer.

 

Development Version 2.26d/2.27d (February 2009)

• 2.27d - fixed slow page changing when gps connected.
  
• New GPS connection options have been added for the GPS. The options are available on the Connect tab on the NMEA (GPS) configuration dialog. The options are:
  o Close the GPS port when the PDA is turned off - this may reduce battery use if the serial port is not active when suspended.
  o Reopen the GPS port when the PDA is turned on (if it was on when the PDA was suspended).
  o To reconnect to the GPS if the connection is lost when it is in use.
  
• Incorrect magenta backgrounds on gauges fixed.
  
• Red shift night vision now now shifts 75% to the red instead of 100% - this allows for better differentiation of colors on the screen when they are shifted to red.
  
• New buttons added to the screen designer for "Screen Brightness + red shift".
  
• Added buttons to move the active page back 1,2,3,4 or 5 pages.
  
• A program called NoniMapView which can make OziExplorer maps from Google Earth does not write out the .map file correctly, it leaves out the calibration points which are not used, however OziExplorerCE expected those points to be included in the .map file. This results in the corner markers and map scale parameters not being loaded when NoniMapView created maps are used. OziExplorerCE has been modified to load .map files which do not have the unused calibration points and these map files now load ok.
  
• For people using the hires.dat file option for high resolution devices and using a language other than English - a fix has been done so the dialogs will display the full text for labels and not truncate them.
  
• The saved map image for the log book should now center around the gps position.
  
• A new menu option has been added for the 3D view to turn it on/off.
  
• The anchor_alarm.wav file not being used has been fixed.
  
• A simple software keyboard has been added. It will be used if OziExplorerCE detects the OS does not have a software keyboard installed.
  

Development Version 2.25d (January 2009)

• Magenta backgrounds on parameters should now be fixed.
  
• Fixed Anchor alarm +50 button only doing +10.
  

Development Version 2.24d (January 2009)

• Red night vision is now available
  o Added button to Screen Designer version 2.24 to activate red night vision.
  o The button will need to be added manually to an OziExplorerCE screen if you want to use it.
  o The Red shift works with the intensity and will only happen at intensities less than 100%.
  
• The anchor alarm circles will only be drawn on the map if the anchor alarm is active.
  
• Made code changes to try and prevent transparent buttons from showing with a magenta background under some circumstances. This only happens on a few devices and I do not know the cause as I cannot duplicate it.
  
• If you do not want the gps to be automatically reconnected if the NMEA data stream is lost then put a file called "no_port_reconnect.dat" in the folder with OziExplorerCE. When OziExplorerCE is started it will detect the presence of this file - OziExplorerCE will then only alert the fact that NMEA has been lost but will not attempt to reconnect the gps.
  

[BBosman]

En versie 2.28d.1 is ook uit.

 

Development Version 2.28d/2.28d.1 (March 2009)

• 2.28d.1 - Changes have been made to the use of the internal keyboard.
  o This information does not apply to Pocket PC's (which always have a keyboard).
  o The parameter to specify the use of the internal keyboard in configuration has been removed.
  o The first time the keyboard is used the windows system keyboard will be activated and you will be asked if you can see the keyboard.
  o If the keyboard is not visible the internal keyboard will be activated.
  o The keyboard configuration is stored in the file keyboard.cfg - delete this file and you will be asked again if you can see a keyboard.
  o Checks are made to see if the PND has a keyboard - in some cases it can be determined that the PND definitely does not have a keyboard and in these cases the internal keyboard is used by default (no question is asked).
  o However it is difficult to determine programmatically if a PND has a keyboard or not, there are so many variations to what is configured in the operating system. In some cases the API functions for using the keyboard or checking if it available are not included in the system dll's.
  
• 2.28d.1 - Minor cosmetic fixes have been made.
  
• 2.28d.1 - Fixed proximity alert for 375 and 500 meters which were not being set correctly.
  
• Fixed the zooming of ecw maps when in 3D perspective mode.
  
• The waypoint color can now be changed in the Waypoint editing dialog.
  
• The default color used when creating waypoints can now be specified in the Waypoints configuration dialog.
  
• The display of total route distance now displays when using a reversed route.
  
• Added new waypoint alert distances for 375 and 500 meters (on Waypoint set List).
  
• The proximity distance of an individual waypoint can now be changed in the waypoint editing dialog (set in meters).
  
• The wp_alert.wav file is played when the proximity is entered and the waypoint is changed to an alert symbol on screen until the proximity is left.
  
• Course up and 3D perspective modes now use a fixed position for the GPS position about 3/4 of the way down the screen (this gives look ahead). This was done so the "Screen Position" setting in configuration (now called "Look Ahead") can now be set to zero when it is not required for a particular activity (such as hiking).
  
• The nmea log file is now stored in the "Data Path" (if activated), it used to be stored with the exe file where file space may be limited.
  

[kalkendotters]

En ondertussen zijn we via diverse 2.19 versies alweer bij 2.30 aangeland.

Belangrijkste verbeteringen:

- herbereken dichtsbijzijnde waypoints veel sneller bij veel waypoints

- veel scherm redraw fouten hersteld

- kan nu .jpg/.png/.bmp kaarten gebruiken ipv alleen ozi2/ozi3/ecw

- geen screen redraw als ozi op de achtergrond staat

[kalkendotters]

En nu zijn we bij een 'echte' release versie aangekomen: versie 2.31

geen opzienbarende nieuwe wijzingen, maar wel stabiel.